Kia Rio: Anchor Pretensioner (APT) Description

Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Front seat belt anchor pretensioner is an auxiliary equipment to prevent the driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

Anchor Pretensioner (APT) Components

...

See also:

AGM Battery: Specification
Item Specification Model type AGM 70L-DIN Capacity [20HR/5HR] (AH) 70/56 Cold Cranking Amperage (A) 760 (SAE) / 610 (EN) ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TP ...