Kia Rio: AVN Head Unit Removal - AVN System - Body Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: AVN Head Unit Removal

AVN Head Unit

     
Х
Take care not to scratch the center fascia panel and related parts.
Х
Ejact all the disc before removing the AVN head unit to prevent damaging the CD player's load mechanism.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad center fascia panel (A).
(Refer to the BD group - "Crash pad")


3.
Disconnect the center fascia panel connectors (A).


4.
Remove the AVN head unit (A) after loosening the mounting screws.


5.
Remove the AVN head unit connectors and cables.



     
-
If CD does not eject, don't try to remove it.
-
The player may be damaged.
-
Therefore, contact a service shop for repairs.
Roof Antenna (Radio + GPS)
1.
Remove the rear roof trim.
(Refer to the BD group - "Roof trim")
2.
Disconnect the antenna cable and the connector (A).


3.
Remove the roof antenna after removing a nut (A).


AVN Head Unit Components
AVN (A/V & Navigation) Head Unit Connector NO Connector A Connector B 1 Rear left spearker + - 2 Front left ...

AVN Head Unit Installation
AVN Head Unit 1. Connect the AVN head unit connectors and cable. 2. Install the AVN head unit. 3. Install t ...

See also:

Yaw-rate and G Sensor Description
When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate electroniclly by the vibration change of plate fork inside the yaw rate sensor. If yaw ...

Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...

Blower Resistor (MANUAL) Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

Copyright © www.kirmanual.com 2014-2019