Kia Rio: Components - Battery - Charging System - Engine Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Components


1. Battery (Non-ISG Type)
2. Battery (ISG Type)

3. Battery tray
4. Battery insulation pad
5. Battery mounting bracket

Specifications
Battery [Non-ISG type] Item Specification Model type CMF45L-BCI Capacity [20HR/5HR] (AH) 45/36 Cold Cranking Amperage (A) ...

Adjustment
Battery charging In general, vehicle battery charging system has three forms. 1. Constant current charge: The battery voltage gradually rises by chargi ...

See also:

Photo Sensor (FATC only) Inspection
1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward photo sensor using a lamp, a ...

Alternator: On-vehicle Inpection
   • Check that the battery cables are connected to the correct terminals. ...

Starter: Inspection
Starter Solenoid Inspection 1. Disconnect the lead wire from the M-terminal of solenoid switch. 2. Connect the battery as shown. If ...

Copyright © www.kirmanual.com 2014-2019