Kia Rio: Description

Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Fuel Pressure Control Valve

...

Specification

Item Specification Coil Resistance (Ω) 0.5 [20°C(68°F) ...

See also:

Installation
Multifunction Switch 1. Install the multifunction switch. 2. Install the clock spring. 3. Install the steer ...

Component Location
1. PCB fuse & relay box (Head lamp low/ hi, Fuel pump #1, HAC, Engine control, Front wiper, Rain sensor, Blower, Cooling fan low/ hi, Horn, Buglar alarm horn, Start relay) ...

SRS Control Module (SRSCM) Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...