Kia Rio: Door Switch Description - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Door Switch Description

Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follows. If the seat belt or door is opened, the engine must not be started or stopped by the ISG function for safety reasons.
Brake Switch Installation
1. Install is reverse of removal. ...

Door Switch Inspection
1. Remove the door switch and check for continuity between the terminals. ...

See also:

Record your key number
The key code number is stamped on the key code tag attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. After reco ...

Removal
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...

Waveform
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these sig ...

Copyright © www.kirmanual.com 2014-2019