Kia Rio: Door Switch Removal - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Door Switch Removal

1.
Remove the door switch (A) after loosening the bolt.


Door Switch Inspection
1. Remove the door switch and check for continuity between the terminals. ...

Door Switch Installation
1. Install is reverse of removal. ...

See also:

DC/DC Converter: Removal and Installation
1. Disconnect the battery negative terminal. Tightening torque Without battery sensor : 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Driver Airbag (DAB) Module and Clock Spring Description
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The ...

Copyright © www.kirmanual.com 2014-2019