Kia Rio: Hood switch Installation - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Hood switch Installation

1.
Install is reverse of removal.
Hood switch Removal
1. After loosening the mounting bolts and connector, then remove the hood switch (A). ...

Fuel Delivery System
...

See also:

Engine oil
Checking the engine oil level 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes ...

Line Pressure Control Solenoid Valve Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Heater & A/C Control Unit (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

Copyright © www.kirmanual.com 2014-2019