Kia Rio: Installation

Removal

1. Remove the under cover. 2. Remove the mounting nut and disconnect the horn connector, then remove the horn (A). ...

AVN System

...

See also:

Waveform
This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these sig ...

Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1.Pull off the ...

AVN Head Unit Installation
AVN Head Unit 1. Connect the AVN head unit connectors and cable. 2. Install the AVN head unit. 3. Install t ...