Kia Rio: Installation

Removal

   • Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does c ...

Clutch Master Cylinder

...

See also:

Disassembly
1. Remove the rear cover (A) after removing nuts. 2. Remove the mounting bolts (A) and the brush holder assembly (B). ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) ...

Power Mosfet (FATC) Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. ...