Kia Rio: Line Pressure Control Solenoid Valve Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: Line Pressure Control Solenoid Valve Specifications

Direct control VFS[LINE Pressure]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
50 ~ 850
 Internal resistance(Ω)
5.1

Line Pressure Control Solenoid Valve Description
line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...

Line Pressure Control Solenoid Valve Circuit Diagram
...

See also:

Component Location
1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. BCM (Body Control Module) ...

Hood
Opening the hood 1.Pull the release lever to unlatch the hood. The hood should pop open slightly. Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P( ...

Instrument Cluster Installation
1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the center fascia panel. ...

Copyright © www.kirmanual.com 2014-2019