Kia Rio: Overhead Console Lamp Inspection - Lighting System - Body Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Overhead Console Lamp Inspection

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the overhead console lamp assembly.


Overhead Console Lamp Removal


Overhead Console Lamp Circuit Diagram
...

Overhead Console Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp lens (B). 3. After ...

See also:

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Specification
Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

Inspection
[Rotor] 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip ...

Copyright © www.kirmanual.com 2014-2019