Kia Rio: Rear Coil Spring Replacement - Rear Suspension System - Suspension System - Kia Rio UB 2012-2025 Service ManualKia Rio: Rear Coil Spring Replacement

1.
Remove the rear wheel & tire.
(Both RH side and LH side)

Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)



     
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the rear shock absorber (A) from the frame by loosening the bolt.
(Both RH side and LH side)

Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)


3.
Remove the coil spring.
4.
Installation is the reverse of removal.
Rear Coil Spring Components
1. Spring upper pad 2. Spring 3. Spring lower pad ...

Rear Coil Spring Inspection
1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

See also:

BCM Overview
The Body Control Module (A) supplies vehicle occupants with visual and audible information and controls various vehicle functions. To provide and receive information, the module is interface ...

Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should be worn low across the front of the pelvis or the pelvis, chest and shoulders, as applicable; wearing the lap sectio ...

Copyright www.kirmanual.com 2014-2025