Kia Rio: Removal - Front Disc Brake - Brake System - Kia Rio UB 2012-2019 Service ManualKia Rio: Removal

1.
Remove the front wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~79.6 lb-ft)

2.
Loosen the hose eyebolt (C) and caliper mounting bolts (B), then remove the front caliper assembly (A).

Tightening torque:
Brake hose to caliper (C):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle (B):
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)


3.
Remove the front brake disc by loosening the screws (A).


Components
1. Guide rod bolt 2. Bleed screw 3. Caliper body 4. Caliper carrier 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Replacement
Front Brake Pads 1. Remove the brake hose mounting bracket bolt (A). Tightening torque: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ...

See also:

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch ...

DC/DC Converter: Component Location
1. DC/DC Converter ...

Compressor Disassembly
1. Remove the RH front tire. (Refer to SS group - “Front Tire”) 2. Remove the engine room RH side under cover. (Refer to EM grou ...

Copyright © www.kirmanual.com 2014-2019