Kia Rio: Smart key unit Inspection - Smart key System - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Smart key unit Inspection

Smart Key Unit
-
Refer to the BE group - inspection / self diagnosis with GDS.
Smart Key Switch
-
Refer to the BE group - inspection / self diagnosis with GDS.
Antenna
-
Refer to the BE group - inspection / self diagnosis with GDS.
Trunk Lid Open Switch
1.
Check for continuity between the Trunk lid open switch terminals.


2.
If continuity is not specified, inspect the switch


Smart key unit Circuit diagram
No. Connector A(26 pins) No. Connector B(16 pins) No. Connector C(22 pins) 1 VBAT_LOAD 1 C_CAN_L 1 O_S ...

Smart key unit Removal
Smart key unit [USA] 1. Disconnect the negative(-) battery terminal. 2. Remove the smart key unit (A) after disconnecting the c ...

See also:

Brake Booster Vacuum Pressure Sensor: Description
In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure sensor is located beside t ...

Transaxle Control Module (TCM) Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...

Smart key
With a smart key, you can lock or unlock a door and even start the engine without inserting the key. The functions of the buttons on a smart key are similar to the remote keyless entry. (Refer ...

Copyright © www.kirmanual.com 2014-2026