Kia Rio: Installation - BCM (Body Control Module) - Body Electrical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Installation

1.
Install the BCM.
2.
Install the crash pad lower panel.
Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Seat Electrical
...

See also:

Antenna Coil Installation
1. Install the antenna coil. 2. Connect the antenna coil connector. 3. Install the crash pad lower panel. ...

Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1.Pull off the ...

Trunk Trim Replacement
   • Put on gloves to protect your hands. • U ...

Copyright © www.kirmanual.com 2014-2024