1. |
Install the interior junction box.
|
2. |
Install the crash pad lower panel.
|
3. |
Check that all system operates normally.
|
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacin ...
Anchor Pretensioner (APT) Installation
1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
Rear Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always p ...