Kia Rio: Foot Actuator (With Auto Defogging System) Description

The foot actuator is located at the heater unit. It adjusts position of the foot door in heater unit of the vehicle equipped with the auto defogging system.

Mode Control Actuator Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad. (Refer to BD group - "Crash Pad") ...

Foot Actuator (With Auto Defogging System) Inspection

1. Turn the ignition switch OFF. 2. Disconnect the foot connector. 3. Verify that the foot actuator operates to ...

See also:

Components Location
1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Po ...

Heater & A/C Control Unit (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

Photo Sensor (FATC only) Description
The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving port ...