If a large amount of unburned gasoline flows into the converter,
it may overheat and create a fire hazard. To prevent this observe the
following precautions and explain them to your customer.
|
1. |
Use only unleaded gasoline.
|
2. |
Do not run the engine while the car is at rest for a long time.
Avoid running the engine at fast idle for more than 10 minutes and idle
speed for more than 20 minutes.
|
3. |
Do not measure engine compression for an extended time. Engine
compression tests must be made as rapidly as possible. Remove the fuel
pump relay before performing a compression test.
|
4. |
Do not dispose of used catalytic converter together with parts
contaminated with gasoline or oil.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV termina ...
Speakers Installation
Front Speaker
1.
Install the front speaker.
2.
Install the front door trim.
Rear Speaker
1.
Install the ...
Electric Oil Pump: Description
This transaxle has a standard Mechanical Oil Pump (MOP) linked to the
input shaft to generates oil pressure when input shaft rotates.
But, this transaxle equipped with ISG system also has ...