Kia Rio: Components Location
| 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Canister close valve (CCV) |
6. Fuel level sensor (FLS) 7. ORVR vlave 8. Roll over valve 9. Fuel tank air filter 10. Catalytic converter |
| 1. PCV valve |
2. Canister |
|
|
|
| 3. Purge control solenoid valve (PCSV) |
4. Fuel tank pressure sensor (FTPS) |
|
|
|
| 5. Canister close valve (CCV) 9. Fuel tank air Filter |
6. Fuel level sensor (FLS) |
|
|
|
| 7. ORVR vlave 8. Roll over valve |
10. Catalytic converter (WCC) |
|
|
|
| 10. Catalytic converter (UCC) |
|
|
|
See also:
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Adjustment
Clutch Release Cylinder Air Bleeding
Procedure
Use the specified fluid. Avoid mixing different brands of flu ...
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective ECM or when
providing additional keys to the vehicle owner.
The procedure st ...
Copyright © www.kirmanual.com 2014-2024