Kia Rio: Removal - Canister - Evaporative Emission Control System - Emission Control System - Kia Rio UB 2012-2026 Service ManualKia Rio: Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle.
3.
Remove the fuel tank.
(Refer to Engine Control/Fuel System - "Fuel Tank")
4.
Disconnect the vapor tube quick-connector (A) and the vapor hose (B).
5.
Remove the canister assembly after removing installation bolts (C).


Canister
...

Inspection
1. Check for the following items visually. - Cracks or leakage of the canister - Loose connection, distortion, or damage of the vapor hose/tube A ...

See also:

Installation
1. Dowel pin of crankshaft setted about 3° with vertical center line. 2. Align the TDC marks (A) of the CVVT sprockets with the upper s ...

Antenna Coil Installation
1. Install the antenna coil. 2. Connect the antenna coil connector. 3. Install the crash pad lower panel. ...

Front Hub / Knuckle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Copyright © www.kirmanual.com 2014-2026