Kia Rio: Roll Over Valve (ROV): Repair procedures - Evaporative Emission Control System - Emission Control System - Kia Rio UB 2012-2026 Service ManualKia Rio: Roll Over Valve (ROV): Repair procedures

Removal

1.
Remove the fuel pump.
(Refer to Engine Control/Fuel System - “Fuel Pump”)
2.
Remove the roll over valve (A) after releasing hooks (B).


Installation

1.
Install in the reverse order of removal.
Installation
1. Install in the reverse order of removal. ...

Fuel Filler Cap
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...

See also:

Circuit Diagram
(M/T) (A/T) ...

Foot Actuator (With Auto Defogging System) Description
The foot actuator is located at the heater unit. It adjusts position of the foot door in heater unit of the vehicle equipped with the auto defogging system. ...

Front Hub / Knuckle Reassembly
1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) ...

Copyright www.kirmanual.com 2014-2026