Kia Rio: Signal Waveform - Heated Oxygen Sensor (HO2S) - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2025 Service ManualKia Rio: Signal Waveform



Circuit Diagram


Specification
HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) ...

Circuit Diagram
(M/T) (A/T) ...

See also:

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side ...

Body Side Moulding Replacement
Roof Garnish Replacement    • When prying with a flat-tip screwdriver, wrap it with p ...

SS-B Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Copyright www.kirmanual.com 2014-2025