Kia Rio: Alternator: Specification - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2026 Service ManualKia Rio: Alternator: Specification

Items
Specification
 ISG Alternator
Rated voltage
13.5V, 110A
Speed in use
1,000 ~ 18,000rpm
Voltage regulator
IC Regulator built-in type
Regulator setting voltage
External mode
ECU control
Internal mode
 14.55 ± 0.3V
Temperature compensation
External mode
0 ± 3mV / °C
Internal mode
-3.5 ± 2mV / °C

Alternator: Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Alternator: On-vehicle Inpection
   • Check that the battery cables are connected to the correct terminals. ...

See also:

Tightening Torques
Item N.m kgf.m lb-ft Ignition coil installation bolt 9.8 ~ 11.8 1.0 ~ 1.2 7.2 ~ 8.7 Spark plug installation 14.7 ~ ...

Control System Composition
Fault Diagnosis Features a fail-safe mechanism that prevents dangerous situations from developing in the event of a transaxle failure. The limp home mode engages if the transaxle malf ...

Rear Washer Switch Inspection
1. With the rear wiper & washer switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace t ...

Copyright www.kirmanual.com 2014-2026