Kia Rio: Fuel Pump Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Rio UB 2012-2026 Service ManualKia Rio: Fuel Pump Installation

1.
Installation is reverse of removal.

Fuel pump plate cover installation bolt :
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.44 ~ 2.17 lb-ft)


     
Be careful of fuel pump direction when installing.
Fuel Pump Removal
1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

Fuel Pump Inspection
[Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembly. ...

See also:

Compression Pressure Inspection
   If there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. ...

Turn Signal Lamp (Door mirror) Installation
Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

Input Speed Sensor Installation
1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Copyright www.kirmanual.com 2014-2026