Kia Rio Manuals

Kia Rio: Transaxle Oil Temperature Sensor Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2026 Service ManualKia Rio: Transaxle Oil Temperature Sensor Installation

1.
Installation is the reverse of removal.

     
After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
•
The gasket of the valve body gasket (A) use new one.
•
Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
Transaxle Oil Temperature Sensor Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data ...

See also:

Components
1. Exhaust camshaft 2. Intake camshaft 3. Exhaust CVVT 4. Intake CVVT 5. Camshaft bearing cap 6. Camshaft front bearing cap 7. O-ring 8. Oil control valve (OCV) ada ...

Specifications
Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] Fuel ...

Parking Brake Adjustment
   • Re-setting of the parking brake is necessary after overhauling the caliper body, or ...

Categories

Copyright www.kirmanual.com 2014-2026