Kia Rio: Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Specifications
Battery [Non-ISG type] Item Specification Model type CMF45L-BCI Capacity [20HR/5HR] (AH) 45/36 Cold Cranking Amperage (A) ...

Hazard warning flasher   lighting
The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as po ...

Front Wheel Alignment
   When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always ...