Kia Rio: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Circuit Diagram

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications

Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized Kia dealer. After starting the en ...

Fluid Replacement
   ATF of 6 speed automatic transaxle doesn’t need to be replaced. If the vehicle is used severely in business or persona ...

Installation
   • Install the component with the specified torques. • ...