Kia Rio: Front Strut Assembly Disassembly and Reassembly
| 1. |
Compress the coil spring with a strut spring compressor. Do not
compress the spring more than necessary.
|
| 2. |
Loosen the lock nut.
|
| 3. |
Disassemble the components of front strut assembly in sequence.
(Refer to Front strut assembly components)
|
| 4. |
Reassembly is the reverse of disassembly.
|
Front Strut Assembly Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Front Strut Assembly Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston rod (A) and check that there is
no abnormal resistance ...
See also:
Cruise control system
The cruise control system allows you to program the vehicle to maintain a constant
speed without depressing the accelerator pedal.
This system is designed to function above approximately 25 mph (40 ...
SRS Control Module (SRSCM) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Radiator: Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, then
install it to pressure tester.
2.
Apply ...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2026 Owners Manual
- Kia Rio YB 2017-2026 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2026