Kia Rio Manuals

Kia Rio: Rear Coil Spring Replacement - Rear Suspension System - Suspension System - Kia Rio UB 2012-2026 Service ManualKia Rio: Rear Coil Spring Replacement

1.
Remove the rear wheel & tire.
(Both RH side and LH side)
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)



     
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the rear shock absorber (A) from the frame by loosening the bolt.
(Both RH side and LH side)
Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)


3.
Remove the coil spring.
4.
Installation is the reverse of removal.
Rear Coil Spring Components
1. Spring upper pad 2. Spring 3. Spring lower pad ...

Rear Coil Spring Inspection
1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

See also:

Precautions
General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airba ...

Tire pressure monitoring system
(1) Low tire pressure telltale / TPMS malfunction indicator Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by ...

Radiator: Components
1.  Cooling fan & reservoir tank assembly 2.  Radiator lower hose 3.  Air guard 4.  Upper cover 5.  Radiator upper hose 6.  Filler neck ...

Categories

Copyright www.kirmanual.com 2014-2026