Kia Rio: Front Impact Sensor (FIS) Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the FIS is to provide an indication of a collision. The FIS sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Variant coding

After replacing the SRSCM with a new unit, the “Variant Codingâ€� procedure must be performed.    1. ...

Front Impact Sensor (FIS) Components

...

See also:

Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Refrigerant System Service Basics
Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system. ...

ECM Terminal And Input/Output signal [M/T]
ECM Terminal Function (M/T) Connector [EGGM-AG] Pin No. Description Connected to 1 Injector (Cylinder #3) [High] control output ...