Kia Rio: Side Airbag (SAB) Module Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace the seat back assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Seat")
|
| 3. |
Remove the seat back assembly.
(Refer to the Body group - "Seat")
|
Side Airbag (SAB) Module Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
...
See also:
Limp Home Function
1.
Limp Home By Tester
If the ECM detects the fault of the Immobilizer or transponder,
the ECM will allow limp home function of the immobilizer. Limp home
is o ...
Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of
power, or hear loud pinging or knocking, the engine is probably too hot. If this
happens, you should:
1.Pull off the ...
Spark Plug: Cleaning
The combustion temporarily becomes unstable, due to the aged fuel and
the carbon deposits accumulated on the spark plug(s) after long-term storage.
[1st Method]
1.
...
Copyright © www.kirmanual.com 2014-2024