Kia Rio: Curtain Airbag (CAB) Module Removal - Airbag Module - Restraint - Kia Rio UB 2012-2026 Service ManualKia Rio: Curtain Airbag (CAB) Module Removal

1.
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
2.
Remove the roof trim.
(Refer to the Body group - "Interior")
3.
Disconnect the curtain airbag harness connector (A).


4.
After loosening the mounting bolts remove the curtain airbag.


Curtain Airbag (CAB) Module Components
...

Curtain Airbag (CAB) Module Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

See also:

Installation
Installation is in the reverse order of removal. Perform the following : • Adjust a shift cable. • Refill engine with engine oil. ...

 Brake fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Seat Belt Buckle Switch (BS) Components
...

Copyright © www.kirmanual.com 2014-2026