Kia Rio Manuals

Kia Rio: Front Wheel Speed Sensor Removal - ESC(Electronic Stability Control) System - Brake System - Kia Rio UB 2012-2026 Service ManualKia Rio: Front Wheel Speed Sensor Removal

1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)


3.
Remove the front wheel guard.
4.
Remove the front wheel speed sensor cable mounting bolt.
5.
Disconnect the front wheel speed sensor connector, and then remove the front wheel speed sensor.
6.
Installation is the reverse of removal.
Front Wheel Speed Sensor Components
1. Front wheel speed sensor connector 2. Front wheel speed sensor ...

Front Wheel Speed Sensor Inspection
1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.    ...

See also:

Rear combination lamp Installation
Rear combination lamp (Inside) [4 Door] 1. Install the rear combination lamp assembly. 2. Connect the rear combination connecto ...

Operation Condition for the ISG function
1. Auto stop or Auto start condition (If all of the below condition are satisfied) Items State Remark Driving conditions ISG OFF Switch ...

Valve Body Components Location
1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor 4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Under drive brake (UD/B) pressur ...

Categories

Copyright www.kirmanual.com 2014-2026