1. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
2. |
Remove the front speaker (A) after loosening 3 screws.
|
1. |
Remove the rear door trim panel.
(Refer to the BD group - "Rear door")
|
2. |
Remove the rear speaker (A) after removing 3 screws.
|
1. |
Remove the front pillar trim (A).
|
2. |
Remove the tweeter speaker (A) after disconnecting the connector
and loosening 2 screws.
|
Smart key unit Circuit diagram
No.
Connector A(26 pins)
No.
Connector B(16 pins)
No.
Connector C(22 pins)
1
VBAT_LOAD
1
C_CAN_L
1
O_S ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
License Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens by pushing the clip (A).
3.
...