Kia Rio: Antenna Installation - Audio - Body Electrical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Antenna Installation

1.
Install the roof antenna, then connect the cable and the connector.
2.
Install the rear roof trim.
Antenna Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable and the connector (A). ...

Audio Remote Control Schematic Diagrams
Circuit Diagram (1) Circuit Diagram (2) ...

See also:

Overhead Console Lamp Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the overhead console lamp assembly. ...

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...

Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...

Copyright © www.kirmanual.com 2014-2024