Kia Rio: Multimedia Jack Installation - Audio - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Multimedia Jack Installation

1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.

     
Make sure the multimedia connector and the console upper cover connectors are plugged in properly.
Multimedia Jack Removal
1. Using a screwdriver or remover, remove the multimidia jack assembly.    ...

Multimedia Jack Troubleshooting
Symptom Suspected area Repairment Pressing power switch does not turn on system Radio receiver power source circuit R-1 LCD module R ...

See also:

Rear Shock Absorber Components
   • Must completely be tigtened at the curb position of vehicle when assemble shock ...

Specification
[AMS type (NON-OAD)] Item Specification Rated voltage 13.5V, 90A Speed in use 1,000 ~ 18,000 rpm Voltage regulator IC ...

Rear Washer Switch Inspection
1. With the rear wiper & washer switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace t ...

Copyright www.kirmanual.com 2014-2026