Kia Rio: Room Lamp Inspection

Room Lamp

Remove the room lamp assembly then check for continuity between terminal. If the continuity is not as specified, replace the room lamp assemlby.

Turn Signal Lamp (Door mirror) Installation

Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

Room Lamp Removal

Room Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove room lamp lens (B). 3. Remove ...

See also:

Windshield Wiper-Washer Switch Inspection
Wiper And Washer Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace ...

Foot Actuator (With Auto Defogging System) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the foot connector. 3. Verify that the foot actuator operates to ...

Ambient Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient t ...