Kia Rio: Seat Belt Switch Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Seat Belt Switch Inspection

1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continuity
Fastened
Non-conductive (∞Ω)
Not fastened
Conductive (Ω)


Seat Belt Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...

Seat Belt Switch Removal
1. Remove the front seat. 2. After loosening the mounting bolt, then remove the front seat belt buckle (A). ...

See also:

Installation
1. Installation is the reverse of removal.    If the oil seal on the transaxle case side is da ...

Valve Body Description
The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regula ...

Manual Transaxle Installation
   When replacing a clutch housing or transaxle assembly, the wiring bracket should be installed in accordance with the clu ...

Copyright © www.kirmanual.com 2014-2019