Kia Rio: Special Service Tools - Engine Electrical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Special Service Tools

Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)


Removal and installation of alternator pulley

Tightening Torques
Item N.m kgf.m lb-ft Ignition coil installation bolt 9.8 ~ 11.8 1.0 ~ 1.2 7.2 ~ 8.7 Spark plug installation 14.7 ~ ...

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect igni ...

See also:

Trunk Lid Replacement
Trunk Lid Assembly Replacement    • When removing and installing the trunk lid, an assistant ...

ESC Control Module Installation
1. Installation is the reverse of removal. 2. Tighten the HECU mounting bolts and nuts to the specified torque. 3. ...

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side ...

Copyright © www.kirmanual.com 2014-2019