Kia Rio: Specification - Restraint - Kia Rio UB 2012-2019 Service ManualKia Rio: Specification

Item
Resistance (Ω)
Driver Airbag (DAB)
1.7 ~ 2.3
Passenger Airbag (PAB)
1.7 ~ 2.3
Side Airbag (SAB)
2.0 ~ 2.4
Curtain Airbag (CAB)
1.7 ~ 2.3
Seat Belt Pretensioner (BPT)
1.8 ~ 2.5
Anchor Pretensioner (APT)
1.8 ~ 2.5

Tightening Torques
Item
N.m
kgf.m
lb-ft
Driver Airbag (DAB)
7.8 ~ 10.8
0.8 ~ 1.1
5.8 ~ 8.0
Passenger Airbag (PAB)
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Curtain Airbag (CAB)
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Seat Belt Anchor Bolt
39.2 ~ 53.9
4.0 ~5.5
28.9 ~ 39.8
SRSCM
7.8 ~ 9.8
0.8 ~ 1.0
5.8 ~ 7.2
Front Impact Sensor (FIS) Mounting Nut
7.8 ~ 9.8
0.8 ~ 1.0
5.8 ~ 7.2
Pressure Side Impact Sensor (PSIS) Mounting Screw
2.5 ~ 3.5
0.25 ~ 0.36
1.8 ~ 2.6
Side Impact Sensor (SIS) Mounting Bolt
7.8 ~ 9.8
0.8 ~ 1.0
5.8 ~ 7.2

General Information
The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and deploying the drive ...

Special Service Tools
Tool(Number and Name) Illustration Use Deployment tool 0957A-34100A Airbag deployment tool. Deployment adapter 0957A-3Q100 ...

See also:

Curtain Airbag (CAB) Module Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

Installation
   Х Install the component with the specified torques. Х ...

Ignition Coil: Inspection
1. Measure the primary coil resistance between terminals (+) and (-). Standard value: 0.75Ω ± 15% ...

Copyright © www.kirmanual.com 2014-2019