Kia Rio: Starter: Circuit Diagram - Starting System - Engine Electrical System - Kia Rio UB 2012-2021 Service ManualKia Rio: Starter: Circuit Diagram

Starter: Removal


Starter: Components
1. Screw 2. Front housing 3. Stop ring 4. Stopper 5. Overunn clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch assembly 10. Armature assemb ...

Starter: Removal
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - &quo ...

See also:

Removal
1. Remove the trunk trim in the trunk after removing the screws and clips. (Refer to the BD group - "Tailgate") 2. Remove ...

Components
1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. Adapter plate ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Copyright © www.kirmanual.com 2014-2021