Kia Rio: System Block Diagram
Component Parts And Function Outline
| Component part |
Function |
| Vehicle speed sensor |
Converts vehicle speed to pulse. |
| ECM |
Receives signals from sensor and control switches. |
| Cruise control indicator |
Illuminate when CRUISE main switch is ON (Built into cluster) |
| Cruise control switches |
Cruise main switch |
Switch for automatic speed control power supply. |
| Resume/Accel switch |
Controls automatic speed control functions by Resume/Accel switch
(Set/Coast switch) |
| Set/Coast switch |
|
| Cancel switches |
Cancel switch |
Sends cancel signals to ECM. |
| Brake pedal switch |
|
| Transaxle range switch (A/T) |
|
| ETS(Electronic Throttle System) motor |
Regulates the throttle valve to the set opening by ECM. |
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch
located on right of steering wheel column. The system has the capability to
cruise, coast, accelerate and res ...
See also:
Oil Pump Unit (OPU) Inspection
OPU Problem Inspection Procedure
1.
TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis
ground using the backside of OPU harness connector ...
Anchor Pretensioner (APT) Installation
1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
Front Hub / Knuckle Disassembly
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
Copyright © www.kirmanual.com 2014-2020