Kia Rio: 26 Brake Control Solenoid Valve(26/B_VFS) Description

26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake.

Torque Converter Control Solenoid Valve (T/CON_VFS) Installation

1. Installation is the reverse of removal.    • ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) Current value(mA ...

See also:

Shift Lever Removal
Shift Lever Assembly Replacement 1. Remove the center console. (Refer to "interior (console)" in BD group) 2. Di ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...