Kia Rio: Audio Unit Installation| 1. |
Connect the audio unit connectors and cable.
|
| 2. |
Install the audio unit.
|
| 3. |
Install the crash pad center fascia garnish.
|
| 4. |
Check the audio system.
|
Audio Unit Removal
Speakers InspectionRear Coil Spring Replacement
1.
Remove the rear wheel & tire.
(Both RH side and LH side)
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb ...
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Mode Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode con ...