1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the roof trim.
(Refer to the BD group - "Roof trim")
|
3. |
Remove the hands free mic after loosening the connector and screw(3EA)
from roof top.
|
4. |
Check the continuity of Mic between terminals.
|
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions.
Refer to the chart below for the appropriate maintenance intervals.
R : Replace
I : I ...
Steering Angle Sensor (MDPS Only) Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power
Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning directio ...
Cruise Control Switch: Removal
1.
Disconnect the battery (-) terminal.
2.
Remove the air-bag module from the steering wheel. (Refer to Restraint
- "Driver Airbag (DA ...