Kia Rio: ISG OFF Switch: Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2026 Service ManualKia Rio: ISG OFF Switch: Inspection

1.
Remove the crash pad side switch assembly (A) from the switch panel on the crach pad of the driver's side.


2.
Remove the ISG switch (A) from the switch assembly.


3.
Check the continuity between the switch 2 and 3 terminals as the ISG OFF switch is engaged.


ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate the ISG function. ...

Alternator: Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

See also:

Photo Sensor (FATC only) Description
The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving port ...

In car sensor (FATC only) Description
The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the r ...

Evaporator Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the evaporator temperature sensor connector (A). 3. ...

Copyright www.kirmanual.com 2014-2026