Kia Rio: Multimedia Jack Removal| 1. |
Using a screwdriver or remover, remove the multimidia jack assembly.
|
| 2. |
Remove the multimedia jack (B) from the console under cover after
releasing the fixed hooks (A).
|
| 3. |
Disconnect the multimedia jack connector.
|
Multimedia Jack Description
Multimedia Jack InstallationDescription
Ignition timing is controlled by the electronic control ignition timing
system.
The standard reference ignition timing data for the engine operating conditions
are pre-pro grammed in the ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by signal from control unit. Pressing the intake selection switch will
shift between recirculation and fresh ai ...
Antenna Installation
1.
Install the roof antenna, then connect the cable and the connector.
2.
Install the rear roof trim.
...