Kia Rio: Relay Box (Passenger Compartment) Installation

Relay Box (Passenger Compartment) Removal

Passenger Compartment Junction Box 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to th ...

Indicators And Gauges

...

See also:

Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TP ...

Installation
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...

A/C Pressure Transducer Inspection
1. Measure the pressure of high pressure line by measuring voltage output between terminal “1� and “2�. 2. Inspect the volt ...