Kia Rio: Smart key unit Installation| 1. |
Install the smart key unit.
|
| 2. |
Install the smart key unit mounting nuts and connector.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the interior 1 antenna.
|
| 2. |
Install the heater & A/C controller.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the interior 2 antenna.
|
| 2. |
Install the console.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the trunk antenna.
|
| 2. |
Install the trunk transverse trim.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the exterior bumper antenna.
|
| 2. |
Install the rear bumper.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the buzzer.
|
| 2. |
Install the left side wheel guard.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the trunk lid open switch.
|
| 2. |
Install the trunk trim.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
| 1. |
Install the outside handle.
|
| 2. |
Install the door trim.
|
| 3. |
Install the negative (-) battery terminal and check the smart
key system.
|
Smart key unit RemovalComponent Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Circuit Diagram
(M/T)
(A/T)
...
Component Location (2)
[4 Door]
1. Back up lamp
2. Turn signal lamp
3. Tail lamp/ Stop lamp
4. Tail lamp
5. Stop lamp
6. Side marker lamp
7. High mounted stop lamp
8. Lic ...