Kia Rio: Radiator: Specifications - Cooling System - Engine Mechanical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Radiator: Specifications

Item
Specification
Non - Air conditioning type
Air conditioning type
Fan type
PULLER
Fan speed control
Resistor (On-Off)
Resistor (Hi-Low-Off)
Air flow rate [m³/h (yd³/h)]
1,650 (2,158) -10% min.
2,000 (2,616) -10% min.
Fan speed (rpm)
1,600 ±10%
2,000 ±10%
Current (A)
10.0 +10% max.
15.0 +10% max.

Radiator: Description
[Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

Radiator: Circuit Diagram
...

See also:

Components Location
1. Sub frame 2. Drive shaft 3. Lower arm 4. Strut assembly 5. Steering gearbox 6. Stabilizer bar ...

Circuit Diagram
Hamess Connector Pin No. Discription Remark 1 - 2 - 3 - 4 ...

Installation
1. Install the intake CVVT (A) and exhaust CVVT (B). Tightening torque : 63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft) ...

Copyright www.kirmanual.com 2014-2026